Aurorad 1kg QZY-2-180 Wire Magnet 0.5mm Copper Wire Enameled Magnetic Coil Winding DIY (Color : 0.38mm, Size : 1000g)

Common sense: the diameter specified in the specifications of the enameled wire refers to the diameter of the bare copper wire, apart from the thickness of the paint insulator. The diameter of the enameled wire measured with a gauge is the outer diameter, including the thickness of the paint insulation, and the measured size is usually larger than the size of the specification standard.The product in this link is a copper wire, Excluding coils. There are different colors and sizes of coils. Please know that the copper wires of 1.3mm and above specifications are relatively thick and cannot be straightened after being wound, therefore, the copper wire is not equipped with a coil.The thickened tree is not easy to damage. The shaft holes at both ends are the same size, and are more convenient to use. When the thin copper wire is wound, the coil should be placed upright to allow the copper wire to fall naturally and then wound. Please noticeNote: The diameter of the enameled wire specification refers to the diameter of the bare copper wire, not including the thickness of the lacquer. The diameter of the enameled wire we measured with a caliper is the outer diameter (including the thickness of the paint), and the paint on the wire needs to be scraped off by soldering.Round enameled winding wire (referred to as enameled wire). It is mainly used in motors, water pumps, household appliances, communication equipment and electrical tools, and is widely used. QZY-2/180 polyester round enameled copper wireProduct description:Name: QZY-2 polyester round enameled copper wireWithstand voltage: 1000V or more Color: JujubeSpecification: 0.1-2.5MMPrices: 1000 grams of priceUses: Widely used in high frequency transformers, inductive loops, transformers, relays, motors, electrical instrumentation coil windings with a long-term operating temperature below 180Q in QZ-2 is the code number, the first letter lacquer lacque

• Common sense: the diameter specified in the specifications of the enameled wire refers to the diameter of the bare copper wire, apart from the thickness of the paint insulator.
• The diameter of the enameled wire measured with a gauge is the outer diameter, including the thickness of the paint insulation, and the measured size is usually larger than the size of the specification standard.
• The product in this link is a copper wire, Excluding coils. There are different colors and sizes of coils.
• Please know that the copper wires of 1.3mm and above specifications are relatively thick and cannot be straightened after being wound, therefore, the copper wire is not equipped with a coil.
• The thickened tree is not easy to damage. The shaft holes at both ends are the same size, and are more convenient to use. When the thin copper wire is wound, the coil should be placed upright to allow the copper wire to fall naturally and then wound.